CIHealth
<
Single Day: Mar 16▾
Last 7 Days Weekly: Mar 16 - Mar 22 Sprint: Mar 16 - Mar 29 Single Day: Mar 16
Custom time window
> Reset
View JSON API

Environment: PROD

Failure patterns: 9 · Failures matched: 23 · Total runs: 2 · Runs affected: 2

Failure patternThe canonical description of a recurring CI failure, extracted and normalized from raw logs.Failed atThe stage of the job run where this failure occurred: 'provision' (environment setup, DEV only), 'e2e' (test suite execution), or 'other' (CI infrastructure issues that did not produce a failure pattern).Number of distinct job runs where this failure pattern was detected.Percentage of all job runs in this environment affected by this failure pattern during the selected window.Classification of this failure pattern: Regression (likely caused by a specific PR), Flake (intermittent failure spread across days), Noise (low-quality or generic pattern), or Indeterminate.TrendShows daily activity for this failure pattern in a trailing window anchored to the selected end date. The sparkline covers at least 7 days and at most 14 days, depending on the current window size.Also inOther environments where the same failure pattern was also detected during the selected window.
timeout during CreateHCPClusterAndWait; context deadline exceeded
full failure pattern:
timeout during CreateHCPClusterAndWait; context deadline exceeded
Signal: IndeterminateSignal: Indeterminate — seen in 1 prior week(s); active 1 day(s)
e2e150.00%1 of 2 job runs affectedIndeterminateSignal: Indeterminate — seen in 1 prior week(s); active 1 day(s)Show trend detailsMar 10: 0 · Mar 11: 0 · Mar 12: 0 · Mar 13: 0 · Mar 14: 0 · Mar 15: 0 · Mar 16: 9none
Full failure examples (3)
fail [github.com/Azure/ARO-HCP/test/e2e/control_plane_automated_z_stream_upgrade.go:95]: Unexpected error:
    <*fmt.wrapErrors | 0xc00155d560>: 
    failed to create HCP cluster cluster-zstream-4-20-vrd9tg, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster cluster-zstream-4-20-vrd9tg in resource group rg-zstream-upgrade-4-20-vppdwr, error: failed waiting for cluster="cluster-zstream-4-20-vrd9tg" in resourcegroup="rg-zstream-upgrade-4-20-vppdwr" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster cluster-zstream-4-20-vrd9tg in resource group rg-zstream-upgrade-4-20-vppdwr, error: context deadline exceeded
    {
        msg: "failed to create HCP cluster cluster-zstream-4-20-vrd9tg, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster cluster-zstream-4-20-vrd9tg in resource group rg-zstream-upgrade-4-20-vppdwr, error: failed waiting for cluster=\"cluster-zstream-4-20-vrd9tg\" in resourcegroup=\"rg-zstream-upgrade-4-20-vppdwr\" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster cluster-zstream-4-20-vrd9tg in resource group rg-zstream-upgrade-4-20-vppdwr, error: context deadline exceeded",
        errs: [
            <*errors.errorString | 0xc000a12410>{
                s: "timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster cluster-zstream-4-20-vrd9tg in resource group rg-zstream-upgrade-4-20-vppdwr",
            },
            <*fmt.wrapErrors | 0xc00155d530>{
                msg: "failed waiting for cluster=\"cluster-zstream-4-20-vrd9tg\" in resourcegroup=\"rg-zstream-upgrade-4-20-vppdwr\" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster cluster-zstream-4-20-vrd9tg in resource group rg-zstream-upgrade-4-20-vppdwr, error: context deadline exceeded",
                errs: [
                    <*errors.errorString | 0xc000a12410>{
                        s: "timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster cluster-zstream-4-20-vrd9tg in resource group rg-zstream-upgrade-4-20-vppdwr",
                    },
                    <context.deadlineExceededError>{},
                ],
            },
        ],
    }
occurred
fail [github.com/Azure/ARO-HCP/test/e2e/control_plane_automated_z_stream_upgrade.go:95]: Unexpected error:
    <*fmt.wrapErrors | 0xc00155d560>: 
    failed to create HCP cluster cluster-zstream-4-20-vrd9tg, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster cluster-zstream-4-20-vrd9tg in resource group rg-zstream-upgrade-4-20-vppdwr, error: failed waiting for cluster="cluster-zstream-4-20-vrd9tg" in resourcegroup="rg-zstream-upgrade-4-20-vppdwr" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster cluster-zstream-4-20-vrd9tg in resource group rg-zstream-upgrade-4-20-vppdwr, error: context deadline exceeded
    {
        msg: "failed to create HCP cluster cluster-zstream-4-20-vrd9tg, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster cluster-zstream-4-20-vrd9tg in resource group rg-zstream-upgrade-4-20-vppdwr, error: failed waiting for cluster=\"cluster-zstream-4-20-vrd9tg\" in resourcegroup=\"rg-zstream-upgrade-4-20-vppdwr\" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster cluster-zstream-4-20-vrd9tg in resource group rg-zstream-upgrade-4-20-vppdwr, error: context deadline exceeded",
        errs: [
            <*errors.errorString | 0xc000a12410>{
                s: "timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster cluster-zstream-4-20-vrd9tg in resource group rg-zstream-upgrade-4-20-vppdwr",
            },
            <*fmt.wrapErrors | 0xc00155d530>{
                msg: "failed waiting for cluster=\"cluster-zstream-4-20-vrd9tg\" in resourcegroup=\"rg-zstream-upgrade-4-20-vppdwr\" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster cluster-zstream-4-20-vrd9tg in resource group rg-zstream-upgrade-4-20-vppdwr, error: context deadline exceeded",
                errs: [
                    <*errors.errorString | 0xc000a12410>{
                        s: "timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster cluster-zstream-4-20-vrd9tg in resource group rg-zstream-upgrade-4-20-vppdwr",
                    },
                    <context.deadlineExceededError>{},
                ],
            },
        ],
    }
occurred
fail [github.com/Azure/ARO-HCP/test/e2e/cluster_autoscaling.go:97]: Unexpected error:
    <*fmt.wrapErrors | 0xc000ddc570>: 
    failed to create HCP cluster autoscaling-hcp-cluster, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster autoscaling-hcp-cluster in resource group autoscaling-cluster-fsqvnh, error: failed waiting for cluster="autoscaling-hcp-cluster" in resourcegroup="autoscaling-cluster-fsqvnh" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster autoscaling-hcp-cluster in resource group autoscaling-cluster-fsqvnh, error: context deadline exceeded
    {
        msg: "failed to create HCP cluster autoscaling-hcp-cluster, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster autoscaling-hcp-cluster in resource group autoscaling-cluster-fsqvnh, error: failed waiting for cluster=\"autoscaling-hcp-cluster\" in resourcegroup=\"autoscaling-cluster-fsqvnh\" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster autoscaling-hcp-cluster in resource group autoscaling-cluster-fsqvnh, error: context deadline exceeded",
        errs: [
            <*errors.errorString | 0xc0013818e0>{
                s: "timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster autoscaling-hcp-cluster in resource group autoscaling-cluster-fsqvnh",
            },
            <*fmt.wrapErrors | 0xc000ddc540>{
                msg: "failed waiting for cluster=\"autoscaling-hcp-cluster\" in resourcegroup=\"autoscaling-cluster-fsqvnh\" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster autoscaling-hcp-cluster in resource group autoscaling-cluster-fsqvnh, error: context deadline exceeded",
                errs: [
                    <*errors.errorString | 0xc0013818e0>{
                        s: "timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster autoscaling-hcp-cluster in resource group autoscaling-cluster-fsqvnh",
                    },
                    <context.deadlineExceededError>{},
                ],
            },
        ],
    }
occurred
fail [github.com/Azure/ARO-HCP/test/e2e/cluster_autoscaling.go:97]: Unexpected error:
    <*fmt.wrapErrors | 0xc000ddc570>: 
    failed to create HCP cluster autoscaling-hcp-cluster, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster autoscaling-hcp-cluster in resource group autoscaling-cluster-fsqvnh, error: failed waiting for cluster="autoscaling-hcp-cluster" in resourcegroup="autoscaling-cluster-fsqvnh" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster autoscaling-hcp-cluster in resource group autoscaling-cluster-fsqvnh, error: context deadline exceeded
    {
        msg: "failed to create HCP cluster autoscaling-hcp-cluster, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster autoscaling-hcp-cluster in resource group autoscaling-cluster-fsqvnh, error: failed waiting for cluster=\"autoscaling-hcp-cluster\" in resourcegroup=\"autoscaling-cluster-fsqvnh\" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster autoscaling-hcp-cluster in resource group autoscaling-cluster-fsqvnh, error: context deadline exceeded",
        errs: [
            <*errors.errorString | 0xc0013818e0>{
                s: "timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster autoscaling-hcp-cluster in resource group autoscaling-cluster-fsqvnh",
            },
            <*fmt.wrapErrors | 0xc000ddc540>{
                msg: "failed waiting for cluster=\"autoscaling-hcp-cluster\" in resourcegroup=\"autoscaling-cluster-fsqvnh\" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster autoscaling-hcp-cluster in resource group autoscaling-cluster-fsqvnh, error: context deadline exceeded",
                errs: [
                    <*errors.errorString | 0xc0013818e0>{
                        s: "timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster autoscaling-hcp-cluster in resource group autoscaling-cluster-fsqvnh",
                    },
                    <context.deadlineExceededError>{},
                ],
            },
        ],
    }
occurred
fail [github.com/Azure/ARO-HCP/test/e2e/cluster_tls_endpoints.go:83]: Unexpected error:
    <*fmt.wrapErrors | 0xc00144c090>: 
    failed to create HCP cluster tls-endpoint-hcp-cluster, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster tls-endpoint-hcp-cluster in resource group tls-endpoint-cluster-l82rz5, error: failed waiting for cluster="tls-endpoint-hcp-cluster" in resourcegroup="tls-endpoint-cluster-l82rz5" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster tls-endpoint-hcp-cluster in resource group tls-endpoint-cluster-l82rz5, error: context deadline exceeded
    {
        msg: "failed to create HCP cluster tls-endpoint-hcp-cluster, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster tls-endpoint-hcp-cluster in resource group tls-endpoint-cluster-l82rz5, error: failed waiting for cluster=\"tls-endpoint-hcp-cluster\" in resourcegroup=\"tls-endpoint-cluster-l82rz5\" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster tls-endpoint-hcp-cluster in resource group tls-endpoint-cluster-l82rz5, error: context deadline exceeded",
        errs: [
            <*errors.errorString | 0xc000aed740>{
                s: "timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster tls-endpoint-hcp-cluster in resource group tls-endpoint-cluster-l82rz5",
            },
            <*fmt.wrapErrors | 0xc00144c060>{
                msg: "failed waiting for cluster=\"tls-endpoint-hcp-cluster\" in resourcegroup=\"tls-endpoint-cluster-l82rz5\" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster tls-endpoint-hcp-cluster in resource group tls-endpoint-cluster-l82rz5, error: context deadline exceeded",
                errs: [
                    <*errors.errorString | 0xc000aed740>{
                        s: "timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster tls-endpoint-hcp-cluster in resource group tls-endpoint-cluster-l82rz5",
                    },
                    <context.deadlineExceededError>{},
                ],
            },
        ],
    }
occurred
fail [github.com/Azure/ARO-HCP/test/e2e/cluster_tls_endpoints.go:83]: Unexpected error:
    <*fmt.wrapErrors | 0xc00144c090>: 
    failed to create HCP cluster tls-endpoint-hcp-cluster, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster tls-endpoint-hcp-cluster in resource group tls-endpoint-cluster-l82rz5, error: failed waiting for cluster="tls-endpoint-hcp-cluster" in resourcegroup="tls-endpoint-cluster-l82rz5" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster tls-endpoint-hcp-cluster in resource group tls-endpoint-cluster-l82rz5, error: context deadline exceeded
    {
        msg: "failed to create HCP cluster tls-endpoint-hcp-cluster, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster tls-endpoint-hcp-cluster in resource group tls-endpoint-cluster-l82rz5, error: failed waiting for cluster=\"tls-endpoint-hcp-cluster\" in resourcegroup=\"tls-endpoint-cluster-l82rz5\" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster tls-endpoint-hcp-cluster in resource group tls-endpoint-cluster-l82rz5, error: context deadline exceeded",
        errs: [
            <*errors.errorString | 0xc000aed740>{
                s: "timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster tls-endpoint-hcp-cluster in resource group tls-endpoint-cluster-l82rz5",
            },
            <*fmt.wrapErrors | 0xc00144c060>{
                msg: "failed waiting for cluster=\"tls-endpoint-hcp-cluster\" in resourcegroup=\"tls-endpoint-cluster-l82rz5\" to finish creating, caused by: timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster tls-endpoint-hcp-cluster in resource group tls-endpoint-cluster-l82rz5, error: context deadline exceeded",
                errs: [
                    <*errors.errorString | 0xc000aed740>{
                        s: "timeout '45.000000' minutes exceeded during CreateHCPClusterFromParam for cluster tls-endpoint-hcp-cluster in resource group tls-endpoint-cluster-l82rz5",
                    },
                    <context.deadlineExceededError>{},
                ],
            },
        ],
    }
occurred
Contributing tests (9)
Failed AtJobTestSupport
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelAuthorized CIDRs Connectivity should allow API access only from authorized VM IP1
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelControl plane automated z-stream upgrade with candidate channel should perform an automated control plane z-stream upgrade for 4.201
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelControl plane automated z-stream upgrade with candidate channel should perform an automated control plane z-stream upgrade for 4.211
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should be able to create an HCP cluster and manage pull secrets1
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should be able to create an HCP cluster with back-level version 4.191
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should be able to create an HCP cluster with custom autoscaling1
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should be able to create node pools with ARM64-based VMs1
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should create an HCP cluster and validate TLS certificates1
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelUpdate HCPOpenShiftCluster Negative creates a cluster and fails to update its name with a PATCH request1
Affected runs (1)
Date (UTC)Associated PRProw job
n/a2033409517772869632
ERROR CODE: InternalServerError; detail message insufficient public IP address quota: required <count>, available <count>; provider Microsoft.RedHatOpenShift
full failure pattern:
ERROR CODE: InternalServerError; detail message insufficient public IP address quota: required <count>, available <count>; provider Microsoft.RedHatOpenShift
Signal: IndeterminateSignal: Indeterminate — seen in 1 prior week(s); active 1 day(s)
e2e150.00%1 of 2 job runs affectedIndeterminateSignal: Indeterminate — seen in 1 prior week(s); active 1 day(s)Show trend detailsMar 10: 0 · Mar 11: 0 · Mar 12: 0 · Mar 13: 0 · Mar 14: 0 · Mar 15: 0 · Mar 16: 7none
Full failure examples (3)
fail [github.com/Azure/ARO-HCP/test/e2e/image_registry_cluster_create.go:89]: Unexpected error:
    <*fmt.wrapError | 0xc00095c4c0>: 
    failed to create HCP cluster disabled-image-registry-hcp-cluster: failed waiting for cluster="disabled-image-registry-hcp-cluster" in resourcegroup="disabled-image-registry-psrj8k" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/b4b3429d-a139-425f-b110-f68346a4fe8b
    --------------------------------------------------------------------------------
    RESPONSE 200: 200 OK
    ERROR CODE: InternalServerError
    --------------------------------------------------------------------------------
    {
      "id": "/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/b4b3429d-a139-425f-b110-f68346a4fe8b",
      "name": "b4b3429d-a139-425f-b110-f68346a4fe8b",
      "status": "Failed",
      "startTime": "2026-03-16T05:54:04.320816036Z",
      "endTime": "2026-03-16T05:54:48.517209203Z",
      "error": {
        "code": "InternalServerError",
        "message": "insufficient public IP address quota: required 2, available 0"
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create HCP cluster disabled-image-registry-hcp-cluster: failed waiting for cluster=\"disabled-image-registry-hcp-cluster\" in resourcegroup=\"disabled-image-registry-psrj8k\" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/b4b3429d-a139-425f-b110-f68346a4fe8b\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: InternalServerError\n--------------------------------------------------------------------------------\n{\n  \"id\": \"/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/b4b3429d-a139-425f-b110-f68346a4fe8b\",\n  \"name\": \"b4b3429d-a139-425f-b110-f68346a4fe8b\",\n  \"status\": \"Failed\",\n  \"startTime\": \"2026-03-16T05:54:04.320816036Z\",\n  \"endTime\": \"2026-03-16T05:54:48.517209203Z\",\n  \"error\": {\n    \"code\": \"InternalServerError\",\n    \"message\": \"insufficient public IP address quota: required 2, available 0\"\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc00095c4a0>{
            msg: "failed waiting for cluster=\"disabled-image-registry-hcp-cluster\" in resourcegroup=\"disabled-image-registry-psrj8k\" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/b4b3429d-a139-425f-b110-f68346a4fe8b\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: InternalServerError\n--------------------------------------------------------------------------------\n{\n  \"id\": \"/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/b4b3429d-a139-425f-b110-f68346a4fe8b\",\n  \"name\": \"b4b3429d-a139-425f-b110-f68346a4fe8b\",\n  \"status\": \"Failed\",\n  \"startTime\": \"2026-03-16T05:54:04.320816036Z\",\n  \"endTime\": \"2026-03-16T05:54:48.517209203Z\",\n  \"error\": {\n    \"code\": \"InternalServerError\",\n    \"message\": \"insufficient public IP address quota: required 2, available 0\"\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc000974690>{
                ErrorCode: "InternalServerError",
                StatusCode: 200,
                RawResponse: {
                    Status: "200 OK",
                    StatusCode: 200,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "Content-Length": ["503"],
                        "X-Envoy-Upstream-Service-Time": ["10"],
                        "X-Ms-Ratelimit-Remaining-Subscription-Reads": ["249"],
                        "X-Content-Type-Options": ["nosniff"],
                        "Content-Type": ["application/json"],
                        "X-Ms-Request-Id": [
                            "39e1d21e-9cf9-413f-8981-bd67e2dcc0da",
                        ],
                        "X-Ms-Ratelimit-Remaining-Subscription-Global-Reads": ["3749"],
                        "X-Ms-Correlation-Request-Id": [
                            "6c4b46e2-9a40-4232-9e7e-8cba90b18fb2",
                        ],
                        "Pragma": ["no-cache"],
                        "X-Ms-Operation-Identifier": [
                            "appId=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,tenantId=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,objectId=0e96dbb7-17a2-4393-b2d3-d84524e39c32/canadacentral/57085293-a6f4-4a48-a611-c5bc14532134",
                        ],
                        "Strict-Transport-Security": [
                            "m...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
fail [github.com/Azure/ARO-HCP/test/e2e/image_registry_cluster_create.go:89]: Unexpected error:
    <*fmt.wrapError | 0xc00095c4c0>: 
    failed to create HCP cluster disabled-image-registry-hcp-cluster: failed waiting for cluster="disabled-image-registry-hcp-cluster" in resourcegroup="disabled-image-registry-psrj8k" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/b4b3429d-a139-425f-b110-f68346a4fe8b
    --------------------------------------------------------------------------------
    RESPONSE 200: 200 OK
    ERROR CODE: InternalServerError
    --------------------------------------------------------------------------------
    {
      "id": "/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/b4b3429d-a139-425f-b110-f68346a4fe8b",
      "name": "b4b3429d-a139-425f-b110-f68346a4fe8b",
      "status": "Failed",
      "startTime": "2026-03-16T05:54:04.320816036Z",
      "endTime": "2026-03-16T05:54:48.517209203Z",
      "error": {
        "code": "InternalServerError",
        "message": "insufficient public IP address quota: required 2, available 0"
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create HCP cluster disabled-image-registry-hcp-cluster: failed waiting for cluster=\"disabled-image-registry-hcp-cluster\" in resourcegroup=\"disabled-image-registry-psrj8k\" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/b4b3429d-a139-425f-b110-f68346a4fe8b\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: InternalServerError\n--------------------------------------------------------------------------------\n{\n  \"id\": \"/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/b4b3429d-a139-425f-b110-f68346a4fe8b\",\n  \"name\": \"b4b3429d-a139-425f-b110-f68346a4fe8b\",\n  \"status\": \"Failed\",\n  \"startTime\": \"2026-03-16T05:54:04.320816036Z\",\n  \"endTime\": \"2026-03-16T05:54:48.517209203Z\",\n  \"error\": {\n    \"code\": \"InternalServerError\",\n    \"message\": \"insufficient public IP address quota: required 2, available 0\"\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc00095c4a0>{
            msg: "failed waiting for cluster=\"disabled-image-registry-hcp-cluster\" in resourcegroup=\"disabled-image-registry-psrj8k\" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/b4b3429d-a139-425f-b110-f68346a4fe8b\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: InternalServerError\n--------------------------------------------------------------------------------\n{\n  \"id\": \"/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/b4b3429d-a139-425f-b110-f68346a4fe8b\",\n  \"name\": \"b4b3429d-a139-425f-b110-f68346a4fe8b\",\n  \"status\": \"Failed\",\n  \"startTime\": \"2026-03-16T05:54:04.320816036Z\",\n  \"endTime\": \"2026-03-16T05:54:48.517209203Z\",\n  \"error\": {\n    \"code\": \"InternalServerError\",\n    \"message\": \"insufficient public IP address quota: required 2, available 0\"\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc000974690>{
                ErrorCode: "InternalServerError",
                StatusCode: 200,
                RawResponse: {
                    Status: "200 OK",
                    StatusCode: 200,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "Content-Length": ["503"],
                        "X-Envoy-Upstream-Service-Time": ["10"],
                        "X-Ms-Ratelimit-Remaining-Subscription-Reads": ["249"],
                        "X-Content-Type-Options": ["nosniff"],
                        "Content-Type": ["application/json"],
                        "X-Ms-Request-Id": [
                            "39e1d21e-9cf9-413f-8981-bd67e2dcc0da",
                        ],
                        "X-Ms-Ratelimit-Remaining-Subscription-Global-Reads": ["3749"],
                        "X-Ms-Correlation-Request-Id": [
                            "6c4b46e2-9a40-4232-9e7e-8cba90b18fb2",
                        ],
                        "Pragma": ["no-cache"],
                        "X-Ms-Operation-Identifier": [
                            "appId=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,tenantId=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,objectId=0e96dbb7-17a2-4393-b2d3-d84524e39c32/canadacentral/57085293-a6f4-4a48-a611-c5bc14532134",
                        ],
                        "Strict-Transport-Security": [
                            "m...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
fail [github.com/Azure/ARO-HCP/test/e2e/external_auth_list_and_verify.go:84]: Unexpected error:
    <*fmt.wrapError | 0xc00088aac0>: 
    failed to create HCP cluster ea-listnpt7gm: failed waiting for cluster="ea-listnpt7gm" in resourcegroup="ea-list-zq4lft" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/09a3be35-a51e-474a-8388-36b58cf61508
    --------------------------------------------------------------------------------
    RESPONSE 200: 200 OK
    ERROR CODE: InternalServerError
    --------------------------------------------------------------------------------
    {
      "id": "/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/09a3be35-a51e-474a-8388-36b58cf61508",
      "name": "09a3be35-a51e-474a-8388-36b58cf61508",
      "status": "Failed",
      "startTime": "2026-03-16T06:00:58.543305109Z",
      "endTime": "2026-03-16T06:01:21.462955449Z",
      "error": {
        "code": "InternalServerError",
        "message": "insufficient public IP address quota: required 2, available 0"
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create HCP cluster ea-listnpt7gm: failed waiting for cluster=\"ea-listnpt7gm\" in resourcegroup=\"ea-list-zq4lft\" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/09a3be35-a51e-474a-8388-36b58cf61508\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: InternalServerError\n--------------------------------------------------------------------------------\n{\n  \"id\": \"/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/09a3be35-a51e-474a-8388-36b58cf61508\",\n  \"name\": \"09a3be35-a51e-474a-8388-36b58cf61508\",\n  \"status\": \"Failed\",\n  \"startTime\": \"2026-03-16T06:00:58.543305109Z\",\n  \"endTime\": \"2026-03-16T06:01:21.462955449Z\",\n  \"error\": {\n    \"code\": \"InternalServerError\",\n    \"message\": \"insufficient public IP address quota: required 2, available 0\"\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc00088aaa0>{
            msg: "failed waiting for cluster=\"ea-listnpt7gm\" in resourcegroup=\"ea-list-zq4lft\" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/09a3be35-a51e-474a-8388-36b58cf61508\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: InternalServerError\n--------------------------------------------------------------------------------\n{\n  \"id\": \"/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/09a3be35-a51e-474a-8388-36b58cf61508\",\n  \"name\": \"09a3be35-a51e-474a-8388-36b58cf61508\",\n  \"status\": \"Failed\",\n  \"startTime\": \"2026-03-16T06:00:58.543305109Z\",\n  \"endTime\": \"2026-03-16T06:01:21.462955449Z\",\n  \"error\": {\n    \"code\": \"InternalServerError\",\n    \"message\": \"insufficient public IP address quota: required 2, available 0\"\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc00077bbc0>{
                ErrorCode: "InternalServerError",
                StatusCode: 200,
                RawResponse: {
                    Status: "200 OK",
                    StatusCode: 200,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "Cache-Control": ["no-cache"],
                        "Pragma": ["no-cache"],
                        "Content-Type": ["application/json"],
                        "X-Envoy-Upstream-Service-Time": ["10"],
                        "X-Ms-Ratelimit-Remaining-Subscription-Reads": ["249"],
                        "Strict-Transport-Security": [
                            "max-age=31536000; includeSubDomains",
                        ],
                        "X-Cache": ["CONFIG_NOCACHE"],
                        "Expires": ["-1"],
                        "X-Ms-Operation-Identifier": [
                            "appId=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,tenantId=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,objectId=0e96dbb7-17a2-4393-b2d3-d84524e39c32/canadacentral/381463b8-de5e-41cf-a1d6-b149c681d8c1",
                        ],
                        "X-Ms-Correlation-Request-Id": [
                            "a99d0b49-b6e9-413e-830a-2dcdf4b4a62d",
                        ],
                        "X-Ms-Routing-Request-Id": [
                            "CANADACENTRAL:20260316T060129Z:a99d0b49-b6e9-413e-830a-2dcdf4b4a62d",
                        ],
                        "X-Msedge-Ref": [
  ...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
fail [github.com/Azure/ARO-HCP/test/e2e/external_auth_list_and_verify.go:84]: Unexpected error:
    <*fmt.wrapError | 0xc00088aac0>: 
    failed to create HCP cluster ea-listnpt7gm: failed waiting for cluster="ea-listnpt7gm" in resourcegroup="ea-list-zq4lft" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/09a3be35-a51e-474a-8388-36b58cf61508
    --------------------------------------------------------------------------------
    RESPONSE 200: 200 OK
    ERROR CODE: InternalServerError
    --------------------------------------------------------------------------------
    {
      "id": "/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/09a3be35-a51e-474a-8388-36b58cf61508",
      "name": "09a3be35-a51e-474a-8388-36b58cf61508",
      "status": "Failed",
      "startTime": "2026-03-16T06:00:58.543305109Z",
      "endTime": "2026-03-16T06:01:21.462955449Z",
      "error": {
        "code": "InternalServerError",
        "message": "insufficient public IP address quota: required 2, available 0"
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create HCP cluster ea-listnpt7gm: failed waiting for cluster=\"ea-listnpt7gm\" in resourcegroup=\"ea-list-zq4lft\" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/09a3be35-a51e-474a-8388-36b58cf61508\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: InternalServerError\n--------------------------------------------------------------------------------\n{\n  \"id\": \"/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/09a3be35-a51e-474a-8388-36b58cf61508\",\n  \"name\": \"09a3be35-a51e-474a-8388-36b58cf61508\",\n  \"status\": \"Failed\",\n  \"startTime\": \"2026-03-16T06:00:58.543305109Z\",\n  \"endTime\": \"2026-03-16T06:01:21.462955449Z\",\n  \"error\": {\n    \"code\": \"InternalServerError\",\n    \"message\": \"insufficient public IP address quota: required 2, available 0\"\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc00088aaa0>{
            msg: "failed waiting for cluster=\"ea-listnpt7gm\" in resourcegroup=\"ea-list-zq4lft\" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/09a3be35-a51e-474a-8388-36b58cf61508\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: InternalServerError\n--------------------------------------------------------------------------------\n{\n  \"id\": \"/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/09a3be35-a51e-474a-8388-36b58cf61508\",\n  \"name\": \"09a3be35-a51e-474a-8388-36b58cf61508\",\n  \"status\": \"Failed\",\n  \"startTime\": \"2026-03-16T06:00:58.543305109Z\",\n  \"endTime\": \"2026-03-16T06:01:21.462955449Z\",\n  \"error\": {\n    \"code\": \"InternalServerError\",\n    \"message\": \"insufficient public IP address quota: required 2, available 0\"\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc00077bbc0>{
                ErrorCode: "InternalServerError",
                StatusCode: 200,
                RawResponse: {
                    Status: "200 OK",
                    StatusCode: 200,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "Cache-Control": ["no-cache"],
                        "Pragma": ["no-cache"],
                        "Content-Type": ["application/json"],
                        "X-Envoy-Upstream-Service-Time": ["10"],
                        "X-Ms-Ratelimit-Remaining-Subscription-Reads": ["249"],
                        "Strict-Transport-Security": [
                            "max-age=31536000; includeSubDomains",
                        ],
                        "X-Cache": ["CONFIG_NOCACHE"],
                        "Expires": ["-1"],
                        "X-Ms-Operation-Identifier": [
                            "appId=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,tenantId=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,objectId=0e96dbb7-17a2-4393-b2d3-d84524e39c32/canadacentral/381463b8-de5e-41cf-a1d6-b149c681d8c1",
                        ],
                        "X-Ms-Correlation-Request-Id": [
                            "a99d0b49-b6e9-413e-830a-2dcdf4b4a62d",
                        ],
                        "X-Ms-Routing-Request-Id": [
                            "CANADACENTRAL:20260316T060129Z:a99d0b49-b6e9-413e-830a-2dcdf4b4a62d",
                        ],
                        "X-Msedge-Ref": [
  ...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
fail [github.com/Azure/ARO-HCP/test/e2e/complete_cluster_create.go:96]: Unexpected error:
    <*fmt.wrapError | 0xc000695540>: 
    failed to create HCP cluster basic-hcp-cluster: failed waiting for cluster="basic-hcp-cluster" in resourcegroup="basic-cluster-vgmwdp" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/8acc7e04-af91-4136-83d9-cfd4d620d5c2
    --------------------------------------------------------------------------------
    RESPONSE 200: 200 OK
    ERROR CODE: InternalServerError
    --------------------------------------------------------------------------------
    {
      "id": "/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/8acc7e04-af91-4136-83d9-cfd4d620d5c2",
      "name": "8acc7e04-af91-4136-83d9-cfd4d620d5c2",
      "status": "Failed",
      "startTime": "2026-03-16T05:58:36.120361686Z",
      "endTime": "2026-03-16T05:59:25.865971075Z",
      "error": {
        "code": "InternalServerError",
        "message": "insufficient public IP address quota: required 2, available 0"
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create HCP cluster basic-hcp-cluster: failed waiting for cluster=\"basic-hcp-cluster\" in resourcegroup=\"basic-cluster-vgmwdp\" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/8acc7e04-af91-4136-83d9-cfd4d620d5c2\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: InternalServerError\n--------------------------------------------------------------------------------\n{\n  \"id\": \"/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/8acc7e04-af91-4136-83d9-cfd4d620d5c2\",\n  \"name\": \"8acc7e04-af91-4136-83d9-cfd4d620d5c2\",\n  \"status\": \"Failed\",\n  \"startTime\": \"2026-03-16T05:58:36.120361686Z\",\n  \"endTime\": \"2026-03-16T05:59:25.865971075Z\",\n  \"error\": {\n    \"code\": \"InternalServerError\",\n    \"message\": \"insufficient public IP address quota: required 2, available 0\"\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc000695500>{
            msg: "failed waiting for cluster=\"basic-hcp-cluster\" in resourcegroup=\"basic-cluster-vgmwdp\" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/8acc7e04-af91-4136-83d9-cfd4d620d5c2\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: InternalServerError\n--------------------------------------------------------------------------------\n{\n  \"id\": \"/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/8acc7e04-af91-4136-83d9-cfd4d620d5c2\",\n  \"name\": \"8acc7e04-af91-4136-83d9-cfd4d620d5c2\",\n  \"status\": \"Failed\",\n  \"startTime\": \"2026-03-16T05:58:36.120361686Z\",\n  \"endTime\": \"2026-03-16T05:59:25.865971075Z\",\n  \"error\": {\n    \"code\": \"InternalServerError\",\n    \"message\": \"insufficient public IP address quota: required 2, available 0\"\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc000adeed0>{
                ErrorCode: "InternalServerError",
                StatusCode: 200,
                RawResponse: {
                    Status: "200 OK",
                    StatusCode: 200,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "Cache-Control": ["no-cache"],
                        "Pragma": ["no-cache"],
                        "Expires": ["-1"],
                        "X-Ms-Request-Id": [
                            "20c01661-0afe-48d2-8f91-e191ffbc139d",
                        ],
                        "X-Ms-Ratelimit-Remaining-Subscription-Global-Reads": ["3749"],
                        "X-Ms-Routing-Request-Id": [
                            "CANADACENTRAL:20260316T055926Z:6229d6a4-a060-4bcd-8adb-767c2b1c2524",
                        ],
                        "X-Content-Type-Options": ["nosniff"],
                        "Content-Length": ["503"],
                        "X-Envoy-Upstream-Service-Time": ["11"],
                        "X-Ms-Operation-Identifier": [
                            "appId=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,tenantId=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,objectId=0e96dbb7-17a2-4393-b2d3-d84524e39c32/canadacentral/f93d9d56-0328-4fdd-b9c9-60f270da1dcd",
                        ],
                        "X-Ms-Ratelimit-Remaining-Subscription-Reads": ["249"],
                        "Strict-Transport-Security": [
                            "max-age=3153...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
fail [github.com/Azure/ARO-HCP/test/e2e/complete_cluster_create.go:96]: Unexpected error:
    <*fmt.wrapError | 0xc000695540>: 
    failed to create HCP cluster basic-hcp-cluster: failed waiting for cluster="basic-hcp-cluster" in resourcegroup="basic-cluster-vgmwdp" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/8acc7e04-af91-4136-83d9-cfd4d620d5c2
    --------------------------------------------------------------------------------
    RESPONSE 200: 200 OK
    ERROR CODE: InternalServerError
    --------------------------------------------------------------------------------
    {
      "id": "/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/8acc7e04-af91-4136-83d9-cfd4d620d5c2",
      "name": "8acc7e04-af91-4136-83d9-cfd4d620d5c2",
      "status": "Failed",
      "startTime": "2026-03-16T05:58:36.120361686Z",
      "endTime": "2026-03-16T05:59:25.865971075Z",
      "error": {
        "code": "InternalServerError",
        "message": "insufficient public IP address quota: required 2, available 0"
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create HCP cluster basic-hcp-cluster: failed waiting for cluster=\"basic-hcp-cluster\" in resourcegroup=\"basic-cluster-vgmwdp\" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/8acc7e04-af91-4136-83d9-cfd4d620d5c2\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: InternalServerError\n--------------------------------------------------------------------------------\n{\n  \"id\": \"/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/8acc7e04-af91-4136-83d9-cfd4d620d5c2\",\n  \"name\": \"8acc7e04-af91-4136-83d9-cfd4d620d5c2\",\n  \"status\": \"Failed\",\n  \"startTime\": \"2026-03-16T05:58:36.120361686Z\",\n  \"endTime\": \"2026-03-16T05:59:25.865971075Z\",\n  \"error\": {\n    \"code\": \"InternalServerError\",\n    \"message\": \"insufficient public IP address quota: required 2, available 0\"\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc000695500>{
            msg: "failed waiting for cluster=\"basic-hcp-cluster\" in resourcegroup=\"basic-cluster-vgmwdp\" to finish creating: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/8acc7e04-af91-4136-83d9-cfd4d620d5c2\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: InternalServerError\n--------------------------------------------------------------------------------\n{\n  \"id\": \"/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/providers/Microsoft.RedHatOpenShift/locations/eastus2euap/hcpOperationStatuses/8acc7e04-af91-4136-83d9-cfd4d620d5c2\",\n  \"name\": \"8acc7e04-af91-4136-83d9-cfd4d620d5c2\",\n  \"status\": \"Failed\",\n  \"startTime\": \"2026-03-16T05:58:36.120361686Z\",\n  \"endTime\": \"2026-03-16T05:59:25.865971075Z\",\n  \"error\": {\n    \"code\": \"InternalServerError\",\n    \"message\": \"insufficient public IP address quota: required 2, available 0\"\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc000adeed0>{
                ErrorCode: "InternalServerError",
                StatusCode: 200,
                RawResponse: {
                    Status: "200 OK",
                    StatusCode: 200,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "Cache-Control": ["no-cache"],
                        "Pragma": ["no-cache"],
                        "Expires": ["-1"],
                        "X-Ms-Request-Id": [
                            "20c01661-0afe-48d2-8f91-e191ffbc139d",
                        ],
                        "X-Ms-Ratelimit-Remaining-Subscription-Global-Reads": ["3749"],
                        "X-Ms-Routing-Request-Id": [
                            "CANADACENTRAL:20260316T055926Z:6229d6a4-a060-4bcd-8adb-767c2b1c2524",
                        ],
                        "X-Content-Type-Options": ["nosniff"],
                        "Content-Length": ["503"],
                        "X-Envoy-Upstream-Service-Time": ["11"],
                        "X-Ms-Operation-Identifier": [
                            "appId=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,tenantId=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,objectId=0e96dbb7-17a2-4393-b2d3-d84524e39c32/canadacentral/f93d9d56-0328-4fdd-b9c9-60f270da1dcd",
                        ],
                        "X-Ms-Ratelimit-Remaining-Subscription-Reads": ["249"],
                        "Strict-Transport-Security": [
                            "max-age=3153...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
Contributing tests (7)
Failed AtJobTestSupport
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelControl plane automated z-stream upgrade with candidate channel should perform an automated control plane z-stream upgrade for 4.191
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should be able to create an HCP cluster1
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should be able to create an HCP cluster with Image Registry not present1
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should be able to lifecycle and confirm external auth on a cluster1
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should not be able to perform various invalid operations on cluster resources1
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should respect cluster-wide node limits with nodepool autoscaling1
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelUpdate HCPOpenShiftCluster Positive creates a cluster and updates tags with a PATCH request1
Affected runs (1)
Date (UTC)Associated PRProw job
n/a2033409517772869632
Cluster should become ready within 45 minutes
full failure pattern:
Cluster should become ready within 45 minutes
Signal: IndeterminateSignal: Indeterminate — seen in 1 prior week(s); active 1 day(s)
e2e150.00%1 of 2 job runs affectedIndeterminateSignal: Indeterminate — seen in 1 prior week(s); active 1 day(s)Show trend detailsMar 10: 0 · Mar 11: 0 · Mar 12: 0 · Mar 13: 0 · Mar 14: 0 · Mar 15: 0 · Mar 16: 1none
Full failure examples (1)
fail [github.com/Azure/ARO-HCP/test/e2e/admin_credential_lifecycle.go:157]: Timed out after 2700.001s.
Cluster should become ready within 45 minutes
Expected
    <bool>: false
to be true
fail [github.com/Azure/ARO-HCP/test/e2e/admin_credential_lifecycle.go:157]: Timed out after 2700.001s.
Cluster should become ready within 45 minutes
Expected
    <bool>: false
to be true
Contributing tests (1)
Failed AtJobTestSupport
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should be able to test admin credentials before cluster ready, then full admin credential lifecycle1
Affected runs (1)
Date (UTC)Associated PRProw job
n/a2033409517772869632
ERROR CODE: AuthorizationFailed
full failure pattern:
ERROR CODE: AuthorizationFailed
Signal: IndeterminateSignal: Indeterminate — no prior history; active 1 day(s) — New failure pattern — no prior history
e2e150.00%1 of 2 job runs affectedIndeterminateSignal: Indeterminate — no prior history; active 1 day(s) — New failure pattern — no prior historyShow trend detailsMar 10: 0 · Mar 11: 0 · Mar 12: 0 · Mar 13: 0 · Mar 14: 0 · Mar 15: 0 · Mar 16: 1none
Full failure examples (1)
fail [github.com/Azure/ARO-HCP/test/e2e/clusters_sharing_resgroup.go:81]: Unexpected error:
    <*fmt.wrapError | 0xc001504fc0>: 
    failed to create customer-infra: failed waiting for deployment "customer-infra-basic-hcp-cluster-7hz8zk" in resourcegroup="customer-rg-clsh4k" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/customer-rg-clsh4k/providers/Microsoft.Resources/deployments/customer-infra-basic-hcp-cluster-7hz8zk/operationStatuses/08584279655981786609
    --------------------------------------------------------------------------------
    RESPONSE 403: 403 Forbidden
    ERROR CODE: AuthorizationFailed
    --------------------------------------------------------------------------------
    {
      "error": {
        "code": "AuthorizationFailed",
        "message": "The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Resources/deployments/operationStatuses/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/customer-rg-clsh4k/providers/Microsoft.Resources/deployments/customer-infra-basic-hcp-cluster-7hz8zk/operationStatuses/08584279655981786609' or the scope is invalid. If access was recently granted, please refresh your credentials."
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create customer-infra: failed waiting for deployment \"customer-infra-basic-hcp-cluster-7hz8zk\" in resourcegroup=\"customer-rg-clsh4k\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/customer-rg-clsh4k/providers/Microsoft.Resources/deployments/customer-infra-basic-hcp-cluster-7hz8zk/operationStatuses/08584279655981786609\n--------------------------------------------------------------------------------\nRESPONSE 403: 403 Forbidden\nERROR CODE: AuthorizationFailed\n--------------------------------------------------------------------------------\n{\n  \"error\": {\n    \"code\": \"AuthorizationFailed\",\n    \"message\": \"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Resources/deployments/operationStatuses/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/customer-rg-clsh4k/providers/Microsoft.Resources/deployments/customer-infra-basic-hcp-cluster-7hz8zk/operationStatuses/08584279655981786609' or the scope is invalid. If access was recently granted, please refresh your credentials.\"\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc001504fa0>{
            msg: "failed waiting for deployment \"customer-infra-basic-hcp-cluster-7hz8zk\" in resourcegroup=\"customer-rg-clsh4k\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/customer-rg-clsh4k/providers/Microsoft.Resources/deployments/customer-infra-basic-hcp-cluster-7hz8zk/operationStatuses/08584279655981786609\n--------------------------------------------------------------------------------\nRESPONSE 403: 403 Forbidden\nERROR CODE: AuthorizationFailed\n--------------------------------------------------------------------------------\n{\n  \"error\": {\n    \"code\": \"AuthorizationFailed\",\n    \"message\": \"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Resources/deployments/operationStatuses/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/customer-rg-clsh4k/providers/Microsoft.Resources/deployments/customer-infra-basic-hcp-cluster-7hz8zk/operationStatuses/08584279655981786609' or the scope is invalid. If access was recently granted, please refresh your credentials.\"\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc0014bb1a0>{
                ErrorCode: "AuthorizationFailed",
                StatusCode: 403,
                RawResponse: {
                    Status: "403 Forbidden",
                    StatusCode: 403,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "Pragma": ["no-cache"],
                        "Expires": ["-1"],
                        "X-Ms-Failure-Cause": ["gateway"],
                        "X-Ms-Correlation-Request-Id": [
                            "06490acc-bbf6-4428-8144-e61db004ace3",
                        ],
                        "X-Ms-Routing-Request-Id": [
                            "EASTUS2EUAP:20260316T060848Z:06490acc-bbf6-4428-8144-e61db004ace3",
                        ],
                        "Strict-Transport-Security": [
                            "max-age=31536000; includeSubDomains",
                        ],
                        "X-Content-Type-Options": ["nosniff"],
                        "X-Cache": ["CONFIG_NOCACHE"],
                        "Cache-Control": ["no-cache"],
                        "Content-Length": ["569"],
                        "Content-Type": [
                            "applic...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
fail [github.com/Azure/ARO-HCP/test/e2e/clusters_sharing_resgroup.go:81]: Unexpected error:
    <*fmt.wrapError | 0xc001504fc0>: 
    failed to create customer-infra: failed waiting for deployment "customer-infra-basic-hcp-cluster-7hz8zk" in resourcegroup="customer-rg-clsh4k" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/customer-rg-clsh4k/providers/Microsoft.Resources/deployments/customer-infra-basic-hcp-cluster-7hz8zk/operationStatuses/08584279655981786609
    --------------------------------------------------------------------------------
    RESPONSE 403: 403 Forbidden
    ERROR CODE: AuthorizationFailed
    --------------------------------------------------------------------------------
    {
      "error": {
        "code": "AuthorizationFailed",
        "message": "The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Resources/deployments/operationStatuses/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/customer-rg-clsh4k/providers/Microsoft.Resources/deployments/customer-infra-basic-hcp-cluster-7hz8zk/operationStatuses/08584279655981786609' or the scope is invalid. If access was recently granted, please refresh your credentials."
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create customer-infra: failed waiting for deployment \"customer-infra-basic-hcp-cluster-7hz8zk\" in resourcegroup=\"customer-rg-clsh4k\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/customer-rg-clsh4k/providers/Microsoft.Resources/deployments/customer-infra-basic-hcp-cluster-7hz8zk/operationStatuses/08584279655981786609\n--------------------------------------------------------------------------------\nRESPONSE 403: 403 Forbidden\nERROR CODE: AuthorizationFailed\n--------------------------------------------------------------------------------\n{\n  \"error\": {\n    \"code\": \"AuthorizationFailed\",\n    \"message\": \"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Resources/deployments/operationStatuses/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/customer-rg-clsh4k/providers/Microsoft.Resources/deployments/customer-infra-basic-hcp-cluster-7hz8zk/operationStatuses/08584279655981786609' or the scope is invalid. If access was recently granted, please refresh your credentials.\"\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc001504fa0>{
            msg: "failed waiting for deployment \"customer-infra-basic-hcp-cluster-7hz8zk\" in resourcegroup=\"customer-rg-clsh4k\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/customer-rg-clsh4k/providers/Microsoft.Resources/deployments/customer-infra-basic-hcp-cluster-7hz8zk/operationStatuses/08584279655981786609\n--------------------------------------------------------------------------------\nRESPONSE 403: 403 Forbidden\nERROR CODE: AuthorizationFailed\n--------------------------------------------------------------------------------\n{\n  \"error\": {\n    \"code\": \"AuthorizationFailed\",\n    \"message\": \"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Resources/deployments/operationStatuses/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/customer-rg-clsh4k/providers/Microsoft.Resources/deployments/customer-infra-basic-hcp-cluster-7hz8zk/operationStatuses/08584279655981786609' or the scope is invalid. If access was recently granted, please refresh your credentials.\"\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc0014bb1a0>{
                ErrorCode: "AuthorizationFailed",
                StatusCode: 403,
                RawResponse: {
                    Status: "403 Forbidden",
                    StatusCode: 403,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "Pragma": ["no-cache"],
                        "Expires": ["-1"],
                        "X-Ms-Failure-Cause": ["gateway"],
                        "X-Ms-Correlation-Request-Id": [
                            "06490acc-bbf6-4428-8144-e61db004ace3",
                        ],
                        "X-Ms-Routing-Request-Id": [
                            "EASTUS2EUAP:20260316T060848Z:06490acc-bbf6-4428-8144-e61db004ace3",
                        ],
                        "Strict-Transport-Security": [
                            "max-age=31536000; includeSubDomains",
                        ],
                        "X-Content-Type-Options": ["nosniff"],
                        "X-Cache": ["CONFIG_NOCACHE"],
                        "Cache-Control": ["no-cache"],
                        "Content-Length": ["569"],
                        "Content-Type": [
                            "applic...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
Contributing tests (1)
Failed AtJobTestSupport
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should be able to create several HCP clusters in their customer resource group, but not in the same managed resource group1
Affected runs (1)
Date (UTC)Associated PRProw job
n/a2033409517772869632
ERROR CODE: AuthorizationFailed; detail message The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '<uuid>' does not have authorization to perform action 'Microsoft....
full failure pattern:
ERROR CODE: AuthorizationFailed; detail message The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '<uuid>' does not have authorization to perform action 'Microsoft.RedHatOpenShift/hcpOpenShiftClusters/<resource>' over scope '/subscriptions/<subscription>/resourcegroups/<resource-group>/providers/Microsoft.RedHatOpenShift/hcpOpenShiftClusters/hcp-cluster-np-128' or the scope is invalid. If access was recently granted, please refresh your credentials.; provider Microsoft.RedHatOpenShift
Signal: IndeterminateSignal: Indeterminate — no prior history; active 1 day(s) — New failure pattern — no prior history
e2e150.00%1 of 2 job runs affectedIndeterminateSignal: Indeterminate — no prior history; active 1 day(s) — New failure pattern — no prior historyShow trend detailsMar 10: 0 · Mar 11: 0 · Mar 12: 0 · Mar 13: 0 · Mar 14: 0 · Mar 15: 0 · Mar 16: 1none
Full failure examples (1)
fail [github.com/Azure/ARO-HCP/test/e2e/cluster_create_nodepool_osdisk.go:80]: Unexpected error:
    <*fmt.wrapError | 0xc0008f2c20>: 
    failed to create HCP cluster hcp-cluster-np-128: failed starting cluster creation "hcp-cluster-np-128" in resourcegroup="clusternp128-rkr4r8": PUT https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourceGroups/clusternp128-rkr4r8/providers/Microsoft.RedHatOpenShift/hcpOpenShiftClusters/hcp-cluster-np-128
    --------------------------------------------------------------------------------
    RESPONSE 403: 403 Forbidden
    ERROR CODE: AuthorizationFailed
    --------------------------------------------------------------------------------
    {
      "error": {
        "code": "AuthorizationFailed",
        "message": "The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.RedHatOpenShift/hcpOpenShiftClusters/write' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourceGroups/clusternp128-rkr4r8/providers/Microsoft.RedHatOpenShift/hcpOpenShiftClusters/hcp-cluster-np-128' or the scope is invalid. If access was recently granted, please refresh your credentials."
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create HCP cluster hcp-cluster-np-128: failed starting cluster creation \"hcp-cluster-np-128\" in resourcegroup=\"clusternp128-rkr4r8\": PUT https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourceGroups/clusternp128-rkr4r8/providers/Microsoft.RedHatOpenShift/hcpOpenShiftClusters/hcp-cluster-np-128\n--------------------------------------------------------------------------------\nRESPONSE 403: 403 Forbidden\nERROR CODE: AuthorizationFailed\n--------------------------------------------------------------------------------\n{\n  \"error\": {\n    \"code\": \"AuthorizationFailed\",\n    \"message\": \"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.RedHatOpenShift/hcpOpenShiftClusters/write' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourceGroups/clusternp128-rkr4r8/providers/Microsoft.RedHatOpenShift/hcpOpenShiftClusters/hcp-cluster-np-128' or the scope is invalid. If access was recently granted, please refresh your credentials.\"\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc0008f2c00>{
            msg: "failed starting cluster creation \"hcp-cluster-np-128\" in resourcegroup=\"clusternp128-rkr4r8\": PUT https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourceGroups/clusternp128-rkr4r8/providers/Microsoft.RedHatOpenShift/hcpOpenShiftClusters/hcp-cluster-np-128\n--------------------------------------------------------------------------------\nRESPONSE 403: 403 Forbidden\nERROR CODE: AuthorizationFailed\n--------------------------------------------------------------------------------\n{\n  \"error\": {\n    \"code\": \"AuthorizationFailed\",\n    \"message\": \"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.RedHatOpenShift/hcpOpenShiftClusters/write' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourceGroups/clusternp128-rkr4r8/providers/Microsoft.RedHatOpenShift/hcpOpenShiftClusters/hcp-cluster-np-128' or the scope is invalid. If access was recently granted, please refresh your credentials.\"\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc0014046f0>{
                ErrorCode: "AuthorizationFailed",
                StatusCode: 403,
                RawResponse: {
                    Status: "403 Forbidden",
                    StatusCode: 403,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "Content-Length": ["523"],
                        "X-Ms-Correlation-Request-Id": [
                            "2935921b-184b-4fc2-9c09-4c26121abf36",
                        ],
                        "X-Cache": ["CONFIG_NOCACHE"],
                        "Date": [
                            "Mon, 16 Mar 2026 05:50:31 GMT",
                        ],
                        "Content-Type": [
                            "application/json; charset=utf-8",
                        ],
                        "Expires": ["-1"],
                        "X-Ms-Failure-Cause": ["gateway"],
                        "X-Ms-Request-Id": [
                            "2935921b-184b-4fc2-9c09-4c26121abf36",
                        ],
                        "X-Ms-Routing-Request-Id": [
                            "EASTUS2EUAP:20260316T055032Z:2935921b-184b-4fc2-9c09-4c26121abf36",
                        ],
                        "Strict-Transport-Security": [
                            "max-age=31536000; includeSubDomains",
                        ],
                        "X-Content-Type-Options": ["nosniff"],
    ...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
fail [github.com/Azure/ARO-HCP/test/e2e/cluster_create_nodepool_osdisk.go:80]: Unexpected error:
    <*fmt.wrapError | 0xc0008f2c20>: 
    failed to create HCP cluster hcp-cluster-np-128: failed starting cluster creation "hcp-cluster-np-128" in resourcegroup="clusternp128-rkr4r8": PUT https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourceGroups/clusternp128-rkr4r8/providers/Microsoft.RedHatOpenShift/hcpOpenShiftClusters/hcp-cluster-np-128
    --------------------------------------------------------------------------------
    RESPONSE 403: 403 Forbidden
    ERROR CODE: AuthorizationFailed
    --------------------------------------------------------------------------------
    {
      "error": {
        "code": "AuthorizationFailed",
        "message": "The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.RedHatOpenShift/hcpOpenShiftClusters/write' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourceGroups/clusternp128-rkr4r8/providers/Microsoft.RedHatOpenShift/hcpOpenShiftClusters/hcp-cluster-np-128' or the scope is invalid. If access was recently granted, please refresh your credentials."
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create HCP cluster hcp-cluster-np-128: failed starting cluster creation \"hcp-cluster-np-128\" in resourcegroup=\"clusternp128-rkr4r8\": PUT https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourceGroups/clusternp128-rkr4r8/providers/Microsoft.RedHatOpenShift/hcpOpenShiftClusters/hcp-cluster-np-128\n--------------------------------------------------------------------------------\nRESPONSE 403: 403 Forbidden\nERROR CODE: AuthorizationFailed\n--------------------------------------------------------------------------------\n{\n  \"error\": {\n    \"code\": \"AuthorizationFailed\",\n    \"message\": \"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.RedHatOpenShift/hcpOpenShiftClusters/write' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourceGroups/clusternp128-rkr4r8/providers/Microsoft.RedHatOpenShift/hcpOpenShiftClusters/hcp-cluster-np-128' or the scope is invalid. If access was recently granted, please refresh your credentials.\"\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc0008f2c00>{
            msg: "failed starting cluster creation \"hcp-cluster-np-128\" in resourcegroup=\"clusternp128-rkr4r8\": PUT https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourceGroups/clusternp128-rkr4r8/providers/Microsoft.RedHatOpenShift/hcpOpenShiftClusters/hcp-cluster-np-128\n--------------------------------------------------------------------------------\nRESPONSE 403: 403 Forbidden\nERROR CODE: AuthorizationFailed\n--------------------------------------------------------------------------------\n{\n  \"error\": {\n    \"code\": \"AuthorizationFailed\",\n    \"message\": \"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.RedHatOpenShift/hcpOpenShiftClusters/write' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourceGroups/clusternp128-rkr4r8/providers/Microsoft.RedHatOpenShift/hcpOpenShiftClusters/hcp-cluster-np-128' or the scope is invalid. If access was recently granted, please refresh your credentials.\"\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc0014046f0>{
                ErrorCode: "AuthorizationFailed",
                StatusCode: 403,
                RawResponse: {
                    Status: "403 Forbidden",
                    StatusCode: 403,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "Content-Length": ["523"],
                        "X-Ms-Correlation-Request-Id": [
                            "2935921b-184b-4fc2-9c09-4c26121abf36",
                        ],
                        "X-Cache": ["CONFIG_NOCACHE"],
                        "Date": [
                            "Mon, 16 Mar 2026 05:50:31 GMT",
                        ],
                        "Content-Type": [
                            "application/json; charset=utf-8",
                        ],
                        "Expires": ["-1"],
                        "X-Ms-Failure-Cause": ["gateway"],
                        "X-Ms-Request-Id": [
                            "2935921b-184b-4fc2-9c09-4c26121abf36",
                        ],
                        "X-Ms-Routing-Request-Id": [
                            "EASTUS2EUAP:20260316T055032Z:2935921b-184b-4fc2-9c09-4c26121abf36",
                        ],
                        "Strict-Transport-Security": [
                            "max-age=31536000; includeSubDomains",
                        ],
                        "X-Content-Type-Options": ["nosniff"],
    ...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
Contributing tests (1)
Failed AtJobTestSupport
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should be able to create an HCP cluster and custom node pool osDisk size1
Affected runs (1)
Date (UTC)Associated PRProw job
n/a2033409517772869632
ERROR CODE: DeploymentFailed; detail code AuthorizationFailed; detail message The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '<uuid>' does not have authorization...
full failure pattern:
ERROR CODE: DeploymentFailed; detail code AuthorizationFailed; detail message The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '<uuid>' does not have authorization to perform action 'Microsoft.Network/networkSecurityGroups/<resource>' over scope '/subscriptions/<subscription>/resourcegroups/<resource-group>/providers/Microsoft.Network/networkSecurityGroups/customer-nsg' or the scope is invalid. If access was recently granted, please refresh your credentials.; provider Microsoft.Network
Signal: IndeterminateSignal: Indeterminate — no prior history; active 1 day(s) — New failure pattern — no prior history
e2e150.00%1 of 2 job runs affectedIndeterminateSignal: Indeterminate — no prior history; active 1 day(s) — New failure pattern — no prior historyShow trend detailsMar 10: 0 · Mar 11: 0 · Mar 12: 0 · Mar 13: 0 · Mar 14: 0 · Mar 15: 0 · Mar 16: 1none
Full failure examples (1)
fail [github.com/Azure/ARO-HCP/test/e2e/external_auth_create.go:84]: Unexpected error:
    <*fmt.wrapError | 0xc0004993c0>: 
    failed to create customer-infra: failed waiting for deployment "customer-infra-ea-cluster-lqkgx2" in resourcegroup="external-auth-cluster-rhfph2" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/external-auth-cluster-rhfph2/providers/Microsoft.Resources/deployments/customer-infra-ea-cluster-lqkgx2/operationStatuses/08584279665118667979
    --------------------------------------------------------------------------------
    RESPONSE 200: 200 OK
    ERROR CODE: DeploymentFailed
    --------------------------------------------------------------------------------
    {
      "status": "Failed",
      "error": {
        "code": "DeploymentFailed",
        "message": "At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.",
        "details": [
          {
            "code": "Forbidden",
            "message": "{\r\n  \"error\": {\r\n    \"code\": \"AuthorizationFailed\",\r\n    \"message\": \"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/networkSecurityGroups/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/external-auth-cluster-rhfph2/providers/Microsoft.Network/networkSecurityGroups/customer-nsg' or the scope is invalid. If access was recently granted, please refresh your credentials.\"\r\n  }\r\n}"
          }
        ]
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create customer-infra: failed waiting for deployment \"customer-infra-ea-cluster-lqkgx2\" in resourcegroup=\"external-auth-cluster-rhfph2\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/external-auth-cluster-rhfph2/providers/Microsoft.Resources/deployments/customer-infra-ea-cluster-lqkgx2/operationStatuses/08584279665118667979\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: DeploymentFailed\n--------------------------------------------------------------------------------\n{\n  \"status\": \"Failed\",\n  \"error\": {\n    \"code\": \"DeploymentFailed\",\n    \"message\": \"At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.\",\n    \"details\": [\n      {\n        \"code\": \"Forbidden\",\n        \"message\": \"{\\r\\n  \\\"error\\\": {\\r\\n    \\\"code\\\": \\\"AuthorizationFailed\\\",\\r\\n    \\\"message\\\": \\\"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/networkSecurityGroups/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/external-auth-cluster-rhfph2/providers/Microsoft.Network/networkSecurityGroups/customer-nsg' or the scope is invalid. If access was recently granted, please refresh your credentials.\\\"\\r\\n  }\\r\\n}\"\n      }\n    ]\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc000499380>{
            msg: "failed waiting for deployment \"customer-infra-ea-cluster-lqkgx2\" in resourcegroup=\"external-auth-cluster-rhfph2\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/external-auth-cluster-rhfph2/providers/Microsoft.Resources/deployments/customer-infra-ea-cluster-lqkgx2/operationStatuses/08584279665118667979\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: DeploymentFailed\n--------------------------------------------------------------------------------\n{\n  \"status\": \"Failed\",\n  \"error\": {\n    \"code\": \"DeploymentFailed\",\n    \"message\": \"At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.\",\n    \"details\": [\n      {\n        \"code\": \"Forbidden\",\n        \"message\": \"{\\r\\n  \\\"error\\\": {\\r\\n    \\\"code\\\": \\\"AuthorizationFailed\\\",\\r\\n    \\\"message\\\": \\\"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/networkSecurityGroups/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/external-auth-cluster-rhfph2/providers/Microsoft.Network/networkSecurityGroups/customer-nsg' or the scope is invalid. If access was recently granted, please refresh your credentials.\\\"\\r\\n  }\\r\\n}\"\n      }\n    ]\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc000baa6f0>{
                ErrorCode: "DeploymentFailed",
                StatusCode: 200,
                RawResponse: {
                    Status: "200 OK",
                    StatusCode: 200,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "Strict-Transport-Security": [
                            "max-age=31536000; includeSubDomains",
                        ],
                        "X-Cache": ["CONFIG_NOCACHE"],
     ...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
fail [github.com/Azure/ARO-HCP/test/e2e/external_auth_create.go:84]: Unexpected error:
    <*fmt.wrapError | 0xc0004993c0>: 
    failed to create customer-infra: failed waiting for deployment "customer-infra-ea-cluster-lqkgx2" in resourcegroup="external-auth-cluster-rhfph2" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/external-auth-cluster-rhfph2/providers/Microsoft.Resources/deployments/customer-infra-ea-cluster-lqkgx2/operationStatuses/08584279665118667979
    --------------------------------------------------------------------------------
    RESPONSE 200: 200 OK
    ERROR CODE: DeploymentFailed
    --------------------------------------------------------------------------------
    {
      "status": "Failed",
      "error": {
        "code": "DeploymentFailed",
        "message": "At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.",
        "details": [
          {
            "code": "Forbidden",
            "message": "{\r\n  \"error\": {\r\n    \"code\": \"AuthorizationFailed\",\r\n    \"message\": \"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/networkSecurityGroups/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/external-auth-cluster-rhfph2/providers/Microsoft.Network/networkSecurityGroups/customer-nsg' or the scope is invalid. If access was recently granted, please refresh your credentials.\"\r\n  }\r\n}"
          }
        ]
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create customer-infra: failed waiting for deployment \"customer-infra-ea-cluster-lqkgx2\" in resourcegroup=\"external-auth-cluster-rhfph2\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/external-auth-cluster-rhfph2/providers/Microsoft.Resources/deployments/customer-infra-ea-cluster-lqkgx2/operationStatuses/08584279665118667979\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: DeploymentFailed\n--------------------------------------------------------------------------------\n{\n  \"status\": \"Failed\",\n  \"error\": {\n    \"code\": \"DeploymentFailed\",\n    \"message\": \"At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.\",\n    \"details\": [\n      {\n        \"code\": \"Forbidden\",\n        \"message\": \"{\\r\\n  \\\"error\\\": {\\r\\n    \\\"code\\\": \\\"AuthorizationFailed\\\",\\r\\n    \\\"message\\\": \\\"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/networkSecurityGroups/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/external-auth-cluster-rhfph2/providers/Microsoft.Network/networkSecurityGroups/customer-nsg' or the scope is invalid. If access was recently granted, please refresh your credentials.\\\"\\r\\n  }\\r\\n}\"\n      }\n    ]\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc000499380>{
            msg: "failed waiting for deployment \"customer-infra-ea-cluster-lqkgx2\" in resourcegroup=\"external-auth-cluster-rhfph2\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/external-auth-cluster-rhfph2/providers/Microsoft.Resources/deployments/customer-infra-ea-cluster-lqkgx2/operationStatuses/08584279665118667979\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: DeploymentFailed\n--------------------------------------------------------------------------------\n{\n  \"status\": \"Failed\",\n  \"error\": {\n    \"code\": \"DeploymentFailed\",\n    \"message\": \"At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.\",\n    \"details\": [\n      {\n        \"code\": \"Forbidden\",\n        \"message\": \"{\\r\\n  \\\"error\\\": {\\r\\n    \\\"code\\\": \\\"AuthorizationFailed\\\",\\r\\n    \\\"message\\\": \\\"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/networkSecurityGroups/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/external-auth-cluster-rhfph2/providers/Microsoft.Network/networkSecurityGroups/customer-nsg' or the scope is invalid. If access was recently granted, please refresh your credentials.\\\"\\r\\n  }\\r\\n}\"\n      }\n    ]\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc000baa6f0>{
                ErrorCode: "DeploymentFailed",
                StatusCode: 200,
                RawResponse: {
                    Status: "200 OK",
                    StatusCode: 200,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "Strict-Transport-Security": [
                            "max-age=31536000; includeSubDomains",
                        ],
                        "X-Cache": ["CONFIG_NOCACHE"],
     ...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
Contributing tests (1)
Failed AtJobTestSupport
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should be able to create a cluster with an external auth config and get the external auth config1
Affected runs (1)
Date (UTC)Associated PRProw job
n/a2033409517772869632
ERROR CODE: DeploymentFailed; detail code AuthorizationFailed; detail message The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '<uuid>' does not have authorization...
full failure pattern:
ERROR CODE: DeploymentFailed; detail code AuthorizationFailed; detail message The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '<uuid>' does not have authorization to perform action 'Microsoft.Network/virtualNetworks/<resource>' over scope '/subscriptions/<subscription>/resourcegroups/<resource-group>/providers/Microsoft.Network/virtualNetworks/customer-vnet' or the scope is invalid. If access was recently granted, please refresh your credentials.; provider Microsoft.Network
Signal: IndeterminateSignal: Indeterminate — no prior history; active 1 day(s) — New failure pattern — no prior history
e2e150.00%1 of 2 job runs affectedIndeterminateSignal: Indeterminate — no prior history; active 1 day(s) — New failure pattern — no prior historyShow trend detailsMar 10: 0 · Mar 11: 0 · Mar 12: 0 · Mar 13: 0 · Mar 14: 0 · Mar 15: 0 · Mar 16: 1none
Full failure examples (1)
fail [github.com/Azure/ARO-HCP/test/e2e/nodepool_autoscaling.go:74]: Unexpected error:
    <*fmt.wrapError | 0xc00093d060>: 
    failed to create customer-infra: failed waiting for deployment "customer-infra-np-autoscale-cluster-5pp8qh" in resourcegroup="np-autoscaling-l7brcq" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/np-autoscaling-l7brcq/providers/Microsoft.Resources/deployments/customer-infra-np-autoscale-cluster-5pp8qh/operationStatuses/08584279658982549597
    --------------------------------------------------------------------------------
    RESPONSE 200: 200 OK
    ERROR CODE: DeploymentFailed
    --------------------------------------------------------------------------------
    {
      "status": "Failed",
      "error": {
        "code": "DeploymentFailed",
        "message": "At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.",
        "details": [
          {
            "code": "Forbidden",
            "message": "{\r\n  \"error\": {\r\n    \"code\": \"AuthorizationFailed\",\r\n    \"message\": \"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/virtualNetworks/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/np-autoscaling-l7brcq/providers/Microsoft.Network/virtualNetworks/customer-vnet' or the scope is invalid. If access was recently granted, please refresh your credentials.\"\r\n  }\r\n}"
          }
        ]
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create customer-infra: failed waiting for deployment \"customer-infra-np-autoscale-cluster-5pp8qh\" in resourcegroup=\"np-autoscaling-l7brcq\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/np-autoscaling-l7brcq/providers/Microsoft.Resources/deployments/customer-infra-np-autoscale-cluster-5pp8qh/operationStatuses/08584279658982549597\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: DeploymentFailed\n--------------------------------------------------------------------------------\n{\n  \"status\": \"Failed\",\n  \"error\": {\n    \"code\": \"DeploymentFailed\",\n    \"message\": \"At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.\",\n    \"details\": [\n      {\n        \"code\": \"Forbidden\",\n        \"message\": \"{\\r\\n  \\\"error\\\": {\\r\\n    \\\"code\\\": \\\"AuthorizationFailed\\\",\\r\\n    \\\"message\\\": \\\"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/virtualNetworks/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/np-autoscaling-l7brcq/providers/Microsoft.Network/virtualNetworks/customer-vnet' or the scope is invalid. If access was recently granted, please refresh your credentials.\\\"\\r\\n  }\\r\\n}\"\n      }\n    ]\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc00093d020>{
            msg: "failed waiting for deployment \"customer-infra-np-autoscale-cluster-5pp8qh\" in resourcegroup=\"np-autoscaling-l7brcq\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/np-autoscaling-l7brcq/providers/Microsoft.Resources/deployments/customer-infra-np-autoscale-cluster-5pp8qh/operationStatuses/08584279658982549597\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: DeploymentFailed\n--------------------------------------------------------------------------------\n{\n  \"status\": \"Failed\",\n  \"error\": {\n    \"code\": \"DeploymentFailed\",\n    \"message\": \"At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.\",\n    \"details\": [\n      {\n        \"code\": \"Forbidden\",\n        \"message\": \"{\\r\\n  \\\"error\\\": {\\r\\n    \\\"code\\\": \\\"AuthorizationFailed\\\",\\r\\n    \\\"message\\\": \\\"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/virtualNetworks/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/np-autoscaling-l7brcq/providers/Microsoft.Network/virtualNetworks/customer-vnet' or the scope is invalid. If access was recently granted, please refresh your credentials.\\\"\\r\\n  }\\r\\n}\"\n      }\n    ]\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc0008efc50>{
                ErrorCode: "DeploymentFailed",
                StatusCode: 200,
                RawResponse: {
                    Status: "200 OK",
                    StatusCode: 200,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "X-Msedge-Ref": [
                            "Ref A: ED37EB9E1FA645FA954684A176851865 Ref B: CH1AA2020620045 Ref C: 2026-03-16T06:05:39Z",
                        ],
                        "Date": [
        ...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
fail [github.com/Azure/ARO-HCP/test/e2e/nodepool_autoscaling.go:74]: Unexpected error:
    <*fmt.wrapError | 0xc00093d060>: 
    failed to create customer-infra: failed waiting for deployment "customer-infra-np-autoscale-cluster-5pp8qh" in resourcegroup="np-autoscaling-l7brcq" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/np-autoscaling-l7brcq/providers/Microsoft.Resources/deployments/customer-infra-np-autoscale-cluster-5pp8qh/operationStatuses/08584279658982549597
    --------------------------------------------------------------------------------
    RESPONSE 200: 200 OK
    ERROR CODE: DeploymentFailed
    --------------------------------------------------------------------------------
    {
      "status": "Failed",
      "error": {
        "code": "DeploymentFailed",
        "message": "At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.",
        "details": [
          {
            "code": "Forbidden",
            "message": "{\r\n  \"error\": {\r\n    \"code\": \"AuthorizationFailed\",\r\n    \"message\": \"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/virtualNetworks/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/np-autoscaling-l7brcq/providers/Microsoft.Network/virtualNetworks/customer-vnet' or the scope is invalid. If access was recently granted, please refresh your credentials.\"\r\n  }\r\n}"
          }
        ]
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create customer-infra: failed waiting for deployment \"customer-infra-np-autoscale-cluster-5pp8qh\" in resourcegroup=\"np-autoscaling-l7brcq\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/np-autoscaling-l7brcq/providers/Microsoft.Resources/deployments/customer-infra-np-autoscale-cluster-5pp8qh/operationStatuses/08584279658982549597\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: DeploymentFailed\n--------------------------------------------------------------------------------\n{\n  \"status\": \"Failed\",\n  \"error\": {\n    \"code\": \"DeploymentFailed\",\n    \"message\": \"At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.\",\n    \"details\": [\n      {\n        \"code\": \"Forbidden\",\n        \"message\": \"{\\r\\n  \\\"error\\\": {\\r\\n    \\\"code\\\": \\\"AuthorizationFailed\\\",\\r\\n    \\\"message\\\": \\\"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/virtualNetworks/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/np-autoscaling-l7brcq/providers/Microsoft.Network/virtualNetworks/customer-vnet' or the scope is invalid. If access was recently granted, please refresh your credentials.\\\"\\r\\n  }\\r\\n}\"\n      }\n    ]\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc00093d020>{
            msg: "failed waiting for deployment \"customer-infra-np-autoscale-cluster-5pp8qh\" in resourcegroup=\"np-autoscaling-l7brcq\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/np-autoscaling-l7brcq/providers/Microsoft.Resources/deployments/customer-infra-np-autoscale-cluster-5pp8qh/operationStatuses/08584279658982549597\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: DeploymentFailed\n--------------------------------------------------------------------------------\n{\n  \"status\": \"Failed\",\n  \"error\": {\n    \"code\": \"DeploymentFailed\",\n    \"message\": \"At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.\",\n    \"details\": [\n      {\n        \"code\": \"Forbidden\",\n        \"message\": \"{\\r\\n  \\\"error\\\": {\\r\\n    \\\"code\\\": \\\"AuthorizationFailed\\\",\\r\\n    \\\"message\\\": \\\"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/virtualNetworks/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/np-autoscaling-l7brcq/providers/Microsoft.Network/virtualNetworks/customer-vnet' or the scope is invalid. If access was recently granted, please refresh your credentials.\\\"\\r\\n  }\\r\\n}\"\n      }\n    ]\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc0008efc50>{
                ErrorCode: "DeploymentFailed",
                StatusCode: 200,
                RawResponse: {
                    Status: "200 OK",
                    StatusCode: 200,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "X-Msedge-Ref": [
                            "Ref A: ED37EB9E1FA645FA954684A176851865 Ref B: CH1AA2020620045 Ref C: 2026-03-16T06:05:39Z",
                        ],
                        "Date": [
        ...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
Contributing tests (1)
Failed AtJobTestSupport
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should be able to create a cluster with default autoscaling and a nodepool with autoscaling enabled1
Affected runs (1)
Date (UTC)Associated PRProw job
n/a2033409517772869632
ERROR CODE: DeploymentFailed; detail code AuthorizationFailed; detail message The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '<uuid>' does not have authorization...
full failure pattern:
ERROR CODE: DeploymentFailed; detail code AuthorizationFailed; detail message The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '<uuid>' does not have authorization to perform action 'Microsoft.Network/virtualNetworks/<resource>' over scope '/subscriptions/<subscription>/resourcegroups/<resource-group>/providers/Microsoft.Network/virtualNetworks/customer-vnet-name1' or the scope is invalid. If access was recently granted, please refresh your credentials.; provider Microsoft.Network
Signal: IndeterminateSignal: Indeterminate — no prior history; active 1 day(s) — New failure pattern — no prior history
e2e150.00%1 of 2 job runs affectedIndeterminateSignal: Indeterminate — no prior history; active 1 day(s) — New failure pattern — no prior historyShow trend detailsMar 10: 0 · Mar 11: 0 · Mar 12: 0 · Mar 13: 0 · Mar 14: 0 · Mar 15: 0 · Mar 16: 1none
Full failure examples (1)
fail [github.com/Azure/ARO-HCP/test/e2e/cluster_nsg_subnet_reuse.go:96]: Unexpected error:
    <*fmt.wrapError | 0xc000760480>: 
    failed to create customer-infra: failed waiting for deployment "customer-infra-basic-cluster-wk5cgh" in resourcegroup="rg-cluster-nsg-subnet-reuse-dvvbjq" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/rg-cluster-nsg-subnet-reuse-dvvbjq/providers/Microsoft.Resources/deployments/customer-infra-basic-cluster-wk5cgh/operationStatuses/08584279668585153729
    --------------------------------------------------------------------------------
    RESPONSE 200: 200 OK
    ERROR CODE: DeploymentFailed
    --------------------------------------------------------------------------------
    {
      "status": "Failed",
      "error": {
        "code": "DeploymentFailed",
        "message": "At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.",
        "details": [
          {
            "code": "Forbidden",
            "message": "{\r\n  \"error\": {\r\n    \"code\": \"AuthorizationFailed\",\r\n    \"message\": \"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/virtualNetworks/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/rg-cluster-nsg-subnet-reuse-dvvbjq/providers/Microsoft.Network/virtualNetworks/customer-vnet-name1' or the scope is invalid. If access was recently granted, please refresh your credentials.\"\r\n  }\r\n}"
          }
        ]
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create customer-infra: failed waiting for deployment \"customer-infra-basic-cluster-wk5cgh\" in resourcegroup=\"rg-cluster-nsg-subnet-reuse-dvvbjq\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/rg-cluster-nsg-subnet-reuse-dvvbjq/providers/Microsoft.Resources/deployments/customer-infra-basic-cluster-wk5cgh/operationStatuses/08584279668585153729\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: DeploymentFailed\n--------------------------------------------------------------------------------\n{\n  \"status\": \"Failed\",\n  \"error\": {\n    \"code\": \"DeploymentFailed\",\n    \"message\": \"At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.\",\n    \"details\": [\n      {\n        \"code\": \"Forbidden\",\n        \"message\": \"{\\r\\n  \\\"error\\\": {\\r\\n    \\\"code\\\": \\\"AuthorizationFailed\\\",\\r\\n    \\\"message\\\": \\\"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/virtualNetworks/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/rg-cluster-nsg-subnet-reuse-dvvbjq/providers/Microsoft.Network/virtualNetworks/customer-vnet-name1' or the scope is invalid. If access was recently granted, please refresh your credentials.\\\"\\r\\n  }\\r\\n}\"\n      }\n    ]\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc000760460>{
            msg: "failed waiting for deployment \"customer-infra-basic-cluster-wk5cgh\" in resourcegroup=\"rg-cluster-nsg-subnet-reuse-dvvbjq\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/rg-cluster-nsg-subnet-reuse-dvvbjq/providers/Microsoft.Resources/deployments/customer-infra-basic-cluster-wk5cgh/operationStatuses/08584279668585153729\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: DeploymentFailed\n--------------------------------------------------------------------------------\n{\n  \"status\": \"Failed\",\n  \"error\": {\n    \"code\": \"DeploymentFailed\",\n    \"message\": \"At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.\",\n    \"details\": [\n      {\n        \"code\": \"Forbidden\",\n        \"message\": \"{\\r\\n  \\\"error\\\": {\\r\\n    \\\"code\\\": \\\"AuthorizationFailed\\\",\\r\\n    \\\"message\\\": \\\"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/virtualNetworks/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/rg-cluster-nsg-subnet-reuse-dvvbjq/providers/Microsoft.Network/virtualNetworks/customer-vnet-name1' or the scope is invalid. If access was recently granted, please refresh your credentials.\\\"\\r\\n  }\\r\\n}\"\n      }\n    ]\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc0012bd110>{
                ErrorCode: "DeploymentFailed",
                StatusCode: 200,
                RawResponse: {
                    Status: "200 OK",
                    StatusCode: 200,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "Cache-Control": ["no-cache"],
                        "Pragma": ["no-cache"],
                        "Content-Length": ["839"],
                 ...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
fail [github.com/Azure/ARO-HCP/test/e2e/cluster_nsg_subnet_reuse.go:96]: Unexpected error:
    <*fmt.wrapError | 0xc000760480>: 
    failed to create customer-infra: failed waiting for deployment "customer-infra-basic-cluster-wk5cgh" in resourcegroup="rg-cluster-nsg-subnet-reuse-dvvbjq" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/rg-cluster-nsg-subnet-reuse-dvvbjq/providers/Microsoft.Resources/deployments/customer-infra-basic-cluster-wk5cgh/operationStatuses/08584279668585153729
    --------------------------------------------------------------------------------
    RESPONSE 200: 200 OK
    ERROR CODE: DeploymentFailed
    --------------------------------------------------------------------------------
    {
      "status": "Failed",
      "error": {
        "code": "DeploymentFailed",
        "message": "At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.",
        "details": [
          {
            "code": "Forbidden",
            "message": "{\r\n  \"error\": {\r\n    \"code\": \"AuthorizationFailed\",\r\n    \"message\": \"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/virtualNetworks/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/rg-cluster-nsg-subnet-reuse-dvvbjq/providers/Microsoft.Network/virtualNetworks/customer-vnet-name1' or the scope is invalid. If access was recently granted, please refresh your credentials.\"\r\n  }\r\n}"
          }
        ]
      }
    }
    --------------------------------------------------------------------------------
    
    {
        msg: "failed to create customer-infra: failed waiting for deployment \"customer-infra-basic-cluster-wk5cgh\" in resourcegroup=\"rg-cluster-nsg-subnet-reuse-dvvbjq\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/rg-cluster-nsg-subnet-reuse-dvvbjq/providers/Microsoft.Resources/deployments/customer-infra-basic-cluster-wk5cgh/operationStatuses/08584279668585153729\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: DeploymentFailed\n--------------------------------------------------------------------------------\n{\n  \"status\": \"Failed\",\n  \"error\": {\n    \"code\": \"DeploymentFailed\",\n    \"message\": \"At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.\",\n    \"details\": [\n      {\n        \"code\": \"Forbidden\",\n        \"message\": \"{\\r\\n  \\\"error\\\": {\\r\\n    \\\"code\\\": \\\"AuthorizationFailed\\\",\\r\\n    \\\"message\\\": \\\"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/virtualNetworks/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/rg-cluster-nsg-subnet-reuse-dvvbjq/providers/Microsoft.Network/virtualNetworks/customer-vnet-name1' or the scope is invalid. If access was recently granted, please refresh your credentials.\\\"\\r\\n  }\\r\\n}\"\n      }\n    ]\n  }\n}\n--------------------------------------------------------------------------------\n",
        err: <*fmt.wrapError | 0xc000760460>{
            msg: "failed waiting for deployment \"customer-infra-basic-cluster-wk5cgh\" in resourcegroup=\"rg-cluster-nsg-subnet-reuse-dvvbjq\" to finish: GET https://management.azure.com/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/rg-cluster-nsg-subnet-reuse-dvvbjq/providers/Microsoft.Resources/deployments/customer-infra-basic-cluster-wk5cgh/operationStatuses/08584279668585153729\n--------------------------------------------------------------------------------\nRESPONSE 200: 200 OK\nERROR CODE: DeploymentFailed\n--------------------------------------------------------------------------------\n{\n  \"status\": \"Failed\",\n  \"error\": {\n    \"code\": \"DeploymentFailed\",\n    \"message\": \"At least one resource deployment operation failed. Please list deployment operations for details. Please see https://aka.ms/arm-deployment-operations for usage details.\",\n    \"details\": [\n      {\n        \"code\": \"Forbidden\",\n        \"message\": \"{\\r\\n  \\\"error\\\": {\\r\\n    \\\"code\\\": \\\"AuthorizationFailed\\\",\\r\\n    \\\"message\\\": \\\"The client 'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' with object id '0e96dbb7-17a2-4393-b2d3-d84524e39c32' does not have authorization to perform action 'Microsoft.Network/virtualNetworks/read' over scope '/subscriptions/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/resourcegroups/rg-cluster-nsg-subnet-reuse-dvvbjq/providers/Microsoft.Network/virtualNetworks/customer-vnet-name1' or the scope is invalid. If access was recently granted, please refresh your credentials.\\\"\\r\\n  }\\r\\n}\"\n      }\n    ]\n  }\n}\n--------------------------------------------------------------------------------\n",
            err: <*exported.ResponseError | 0xc0012bd110>{
                ErrorCode: "DeploymentFailed",
                StatusCode: 200,
                RawResponse: {
                    Status: "200 OK",
                    StatusCode: 200,
                    Proto: "HTTP/2.0",
                    ProtoMajor: 2,
                    ProtoMinor: 0,
                    Header: {
                        "Cache-Control": ["no-cache"],
                        "Pragma": ["no-cache"],
                        "Content-Length": ["839"],
                 ...

Gomega truncated this representation as it exceeds 'format.MaxLength'.
Consider having the object provide a custom 'GomegaStringer' representation
or adjust the parameters in Gomega's 'format' package.

Learn more here: https://onsi.github.io/gomega/#adjusting-output

occurred
Contributing tests (1)
Failed AtJobTestSupport
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should not be able to reuse subnets and NSGs between clusters1
Affected runs (1)
Date (UTC)Associated PRProw job
n/a2033409517772869632
subscription openshift-nfd/nfd not ready, state="" (OLM still processing, no errors detected)
full failure pattern:
subscription openshift-nfd/nfd not ready, state="" (OLM still processing, no errors detected)
Signal: IndeterminateSignal: Indeterminate — no prior history; active 1 day(s) — New failure pattern — no prior history
e2e150.00%1 of 2 job runs affectedIndeterminateSignal: Indeterminate — no prior history; active 1 day(s) — New failure pattern — no prior historyShow trend detailsMar 10: 0 · Mar 11: 0 · Mar 12: 0 · Mar 13: 0 · Mar 14: 0 · Mar 15: 0 · Mar 16: 1none
Full failure examples (1)
fail [github.com/Azure/ARO-HCP/test/e2e/cluster_pullsecret.go:60]: Timed out after 600.007s.
NFD operator should be installed successfully
Expected success, but got an error:
    <*errors.errorString | 0xc001039e40>: 
    subscription openshift-nfd/nfd not ready, state="" (OLM still processing, no errors detected)
    {
        s: "subscription openshift-nfd/nfd not ready, state=\"\" (OLM still processing, no errors detected)",
    }
fail [github.com/Azure/ARO-HCP/test/e2e/cluster_pullsecret.go:60]: Timed out after 600.007s.
NFD operator should be installed successfully
Expected success, but got an error:
    <*errors.errorString | 0xc001039e40>: 
    subscription openshift-nfd/nfd not ready, state="" (OLM still processing, no errors detected)
    {
        s: "subscription openshift-nfd/nfd not ready, state=\"\" (OLM still processing, no errors detected)",
    }
Contributing tests (1)
Failed AtJobTestSupport
e2eperiodic-ci-Azure-ARO-HCP-main-periodic-prod-e2e-parallelCustomer should be able to create an HCP cluster and manage pull secrets1
Affected runs (1)
Date (UTC)Associated PRProw job
n/a2033362659054718976